Remote Node Data Assignment - Toshiba Strata CTX28 Programming Manual

670 Remote Node Data Assignment

System Availability: Not available with CTX28
This command assigns the Remote node data (requires R1.3 and higher).
1. Click Services >
Networking > Remote
Node Data.
2. Enter Program 670 data.
3. Click Submit.
F
IELD
Remote Node ID
Remote Node IP Address
Remote Node Port Number
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
D
ESCRIPTION
Enter the Remote Node ID for this node.
Possible values: Up to 6 digits (default = no value)
Enter the remote node IP address.
Possible values: Up to 15 digits (default = no value)
Enter remote node port number.
Possible values: 0~65535 (default = no value)
Services
670 Remote Node Data Assignment
9-55