Toshiba Strata CTX28 Programming Manual page 381

Table 13-28 Programs 303~315 (continued)
Button Sequence
304-01 Group Type
A7 C‚yq
, n,
304-02 Trunk Type
A7 C‚yq
, n,
304-03 Service Type
A7" C‚yq
, n,
304-04 Private Service Type
A7# C‚yq
, n,
304-05 GCO Key Number
A7$ C‚yq
, n,
304-06 Pooled Key Number
A7% C‚yq
, n,
304-07 COS
A7& Tƒx… Ã
, n, , n,
Tƒx… ÃC‚yq
, n,
304-08 DRL
A7' Tƒx… Ã
, n, , n,
Tƒx… ÃC‚yq
, n,
304-09 FRL
A7( Tƒx… Ã
, n, , n,
Tƒx… ÃC‚yq
, n,
304-10 QPL
A7  Tƒx… Ã
Á à Á
Tƒx… ÃC‚yq
Á
304-11 DID Digits
A7 C‚yq
, n,
304-12 Speech/3.1 KHz
A7 C‚yq
, n,
304-13 Ringing Timer Delay 1
A7 " C‚yq
, n,
304-14 Ringing Timer Delay 2
A7 # C‚yq
, n,
304-15 Interdigit 1 Timer
A7 $ C‚yq
, n,
304-16 Interdigit 2 Timer
A7 % C‚yq
, n,
304-17 Auto Camp-on
A7 & C‚yq
, n,
304-18 Calling Number ID
A7 ' C‚yq
, n,
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Value(s)
n = 1. Analog (default)
2. ISDN
n = 1. CO (default)
2. Tie
n = 1. DID
2. DIT (default)
n = 1. Standard (default)
2. QSIG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
n = 1~32
(default = 1)
n = 1~16
(default = 1)
n = 1~16
(default = 1)
n = 1~16
(default = 1)
n = 0~7
(default = 0)
n = 1. Audio (default)
2. Speech
n = 0~60 sec.
(default = 12)
n = 0~60 sec.
(default = 24)
n = 1~180 sec.
(default = 15)
n = 1~180 sec.
(default = 5)
n = 1. Enable (default)
2. Disable
n = 1. User Provided
(default)
2. Network Provided
Telephone Button Programming
Summary
Select the ILG Type.
Select the Trunk Type.
Select CO Trunk Service Type.
Select the Tie Trunk Service Type. This field is required when Trunk
Type is set to Tie.
Select ILG GCO Key Group for DIT mode (see Trunk Type above).
The same GCO cannot belong to different ILGs.
Select ILG Pooled Line Key Group for DIT mode. The same Pooled
Line Group cannot belong to different ILGs.
0~128 (CTX670), 0~32 (CTX100) (default = 0)
Select Day 1, Day 2 and Night Values.
Select Day 1, Day 2 and Night Values.
Select Day 1, Day 2 and Night Values.
Select Day 1, Day 2 and Night Values.
Select number of DID digits received from CO.
Select Bearer Capability 3.1 KHz Audio or Speech.
Select time to ring the Delay 1 destination.
Select time to ring the Delay 2 destination.
Select Interdigit 1 timer value.
Select Interdigit 2 timer value.
Select in box to toggle Automatic Camp-on.
Select Calling Number Identification source.
300 Series Programs
13-57