Toshiba Strata CTX28 Programming Manual page 93

F
IELD
39 Std. Tel. Ringing
Cadence
40 Sys CF Cascade
41 CSTA B-Ch. Operation
42 ISDN Complete IE
Option
43 Repeat Last No. Dialed
44 Default Calling Number
45 DSS Ringing Indication
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
D
ESCRIPTION
Select the Ringing Cadence for Standard Telephone circuits. This parameter is
available only with CTX WinAdmin R2.1 and above.
Note This does not apply to Digital to IP telephones.
(Ringing Type1)
External Ring:20Hz, 1sec. ON - 3sec. OFF
Internal Ring:20Hz, 0.4sec.ON - 0.2sec. OFF
- 0.4sec. ON - 3sec. OFF
Recall:20Hz, 1sec. ON - 1sec. OFF
(Ringing Type2)
'Ringing Type2' is the same Ringing Cadence as DK.
External Ring:20Hz, 0.4sec. ON - 0.2sec. OFF
- 0.4sec. ON - 3sec. OFF
Internal Ring:20Hz, 1sec.ON - 3sec. OFF
Recall:20Hz, 1sec. ON - 3sec. OFF
Enable: A call that forwards to a destination that is also System Call forwarded, will
be sent to the destinations System Call Forward destination.
Note Note: If enabled, the SCF alternate destination set in Prg 500-05 will be
ignored.
Disable: A call that forwards to a destination that is System Call Forwarded, will not
follow the destinations System Call Forward.
Possible values: Enable or Disable (default)
Enabled - CSTA shall provide full 'B' Channel path information. Disabled - CSTA
shall provide channel group only.
Possible values: Enable (default) or Disable
Whether to append Sending Complete IE into SETUP message and INFO message
in ISDN.
Possible values: Enable (default) or Disable
Enable - to store dialed numbers that are not complete in the last number dialed
buffer.
Disable - to only store complete telephone numbers in the last number dialed buffer.
Possible values: Enable (default) or Disable
Enabled - the system will send the default Calling Number to the PSTN when
stations make ISDN calls in the local node.
Disable -the system will not send the default Callling number to the PSTN on ISDN
calls in the local node.
Possible values: Enable or Disable (default)
Select whether DSS LEDs should flash red or not light when their respective
Directory Numbers are ringing.
Ringing - DSS LEDs flash red when their respective Directory Numbers are ringing.
Idle - DSS LEDS are idle (not lit) when their respective Directory Numbers are
ringing.
Possible values: Ringing (default) or Idle
System
105 System Data
4-17