System Data - Toshiba Strata CTX28 Programming Manual

F
IELD
23 System Timer Network
DSS Refresh Timer
24 Outgoing Number
Display Timer

105 System Data

Prerequisite Program:
This command assigns system settings for your Strata CTX.
1. From the Program Menu click
System > System Data. The
System Data Assignment screen
displays (shown right).
2. Enter System Parameter data
using the table below.
3. Click Submit.
F
IELD
01 Executive Override
02 Station MOH
03 Ring Transfer Tone
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
D
ESCRIPTION
Select Network DSS Refresh Timer (20 -180 seconds). The time interval when all
Network DSS settings are refreshed system wide.
Note DSS button LEDs change state immediately when the status of the DSS
button changes - regardless of this timer value.
Possible values: 20~180 seconds (default = 30)
This timer sets how long dialed numbers will display on telephone LCDs for outgoing
line calls. (This feature is available with CTX R2.2 or higher and CTX WinAdmin
R2.2G.0 and higher.)
Possible values:1~120 seconds (default = 10)
None
D
ESCRIPTION
Enable break in warning tone for Executive Override.
Possible values: Enable (default) or Disable
Select MOH for private lines and stations.
Possible values: Quiet Tone, External 1 (default), External 2, External 3, External
4, External 5, External 6, External 7, External 8, External 9,
External 10, External 11, External 12, External 13, External 14 or
External 15
Select tones for the transferred party to hear after a ringing transfer takes place.
Possible values: RBT (default) or MOH
System
105 System Data
4-13