Toshiba Strata CTX28 Programming Manual page 227

Services
Destination Restriction Guide Page
Programs 531/650 – Centrex/
PBX DR Screening table.
Use this program to define
Centrex/PBX line access codes. It
defines what DR action should be
applied after users dial the
Centrex/PBX line access code
("Bypass" or "Skip and Apply"
DR). It is also used to assign OLG
to this table and/or enable centres
assume 9 dialing.
Program 117 – Public Dial Plan Digit Analysis (shown right).
Use this program to prevent standard
telephone users from avoiding DR
by sending DTMF tones to the PSTN
before DR analysis is complete. In
LCR applications, it allows calls to
cut through to the PSTN
immediately, so users do not have to
wait for a pause timer to cut through
after dialing a number.
9-11
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04