Called Number Table - Toshiba Strata CTX28 Programming Manual

Trunks
ISDN

322 Called Number Table

Prerequisite Program:
When calls are received from the PSTN, a Called Number is supplied as part of the Setup Message. This
Called Number may be used for directing the call to the appropriate service with Strata CTX.
F
IELD
OLG Number
01 Source Type
02 Source Number
03 DID Number
6-34
306 page 6-4
D
ESCRIPTION
OLG Number.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic), 1~128 (CTX670 Exp),
(default = no value)
Specify the type of circuit used for outgoing calls: 1- PDN; 2- GCO; 3- Pooled Line.
Possible values: Primary DN (0~99999), Group CO (1~128) or Pool Line Group
(1~128); (default = no value)
Specify the number of the source type selected (PDN, GCO or Pooled Line).
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic), 1~128 (CTX670 Exp),
(default = no value)
Specify the number to be sent when calling out from the source (max. seven digits). This
number is appended to Program 321 FB02
Possible values: Up to 7 digits (default = no value)
Note Destination Type and Destination must be entered before a DID number can be
assigned.
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04