Toshiba Strata CTX28 Programming Manual page 116

Station
Assignment
• Change DN – Enter a DN in the Primary DN field and click Change DN. Enter the new DN
assignment and click OK.
5. Setup the DN by adding values to the remaining fields.
6. Click Submit.
F
IELD
01 PDN Equipment No.
02 Station Type
03 Circuit Type
04 COS Day1
•
Day2
•
Night
05 DRL Day1
•
Day2
•
Night
06 FRL Day1
• Day2
•
Night
07 LCR Group
5-2
D
ESCRIPTION
Enter the PDN equipment number (xxyyzz). This is the cabinet, slot, and circuit
number of the ADKU, BDKU/BDKS, PDKU, or RSTU interface PCB to which the
the PDN is, or should be assigned.
Example: If the PDN should be a assigned to a BDKU in cabinet 5, slot 2, circuit 3;
enter 050203.
CTX28 Equipment Numbers: DKT 1~8 = 0101(01~08); SLT 1 & 2 = 0104 (01~02);
DKT 9~16 = 0107 (01~08).
Cabinet numbers:
CTX100: Select 01 for Base and Expansion cabinet.
CTX670: Select 01 for Base and 02~07 respectively for each Expansion cabinet.
Slot numbers:
CTX100: Select 01~04 for Base slots and 05~08 for Expansion slots.
CTX670: Select 01~08 for Base slots and 01~10 for Expansion slots.
Select Station Type.
Possible values: DKT (default) or SLT
Select Extension or Assign Voice Mail attributes to analog circuits
Possible values: Extension (default) or Voice Mail
• Extension – Should be assigned to PDNs that are associated with Digital or
Standard telephones.
•
Voice Mail – Should be assigned to PDNs associated with Voice Mail circuits.
• Announce – Not used in the U.S.A. or Canada. (This feature is available with
CTX R2.2 or higher and CTX WinAdmin R2.2G.0 and higher.)
Assign COS to Day1, Day 2 and Night modes.
Possible values: 1~32 (default = 1)
DRL for DAY1, Day 2 and Night
Possible values: 1~16 (default = 1)
Assign FRL to Day1, Day 2 and Night modes. The higher the FRL number, the
more trunk access is available.
Possible values: 1~16 (default = 1)
Station LCR Group Number
Possible values: 1~16 (default = 1)
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04