Toshiba Strata CTX28 Programming Manual page 473

Program Code
49
49
49
51
51
51
52
52
52
80
82
82
96
98
51
216
52
80
Strata CTX Programming - Part 4: Appendices 6/04
Sub-
FB
parameter
700 The feature code(s) allowed to attendant console only is
790 registered.
800
7
810
820
830
Two or more DSSs with the same value are registered to one
7
610
extension.
120 The entered DN does not exist in the system.
130
7
560
610
The Primary DN entered conflicts with a value of an existing
numbering scheme.
The secondary/phantom DN entered cannot be registered.
7
110
The number conflicts with an existing number scheme.
When setting an owner extension to the additional information
120
7
of CO, GCO, the said CO, GCO keys are not assigned to the
130
Feature buttons of the owner extension.
The Primary DN entered conflicts with an existing DKT
-
extension.
The secondary/PhDN entered cannot be registered. The
7
110
number conflicts with an existing ISDN extension(s), etc.
120 The CO or GCO Owner DN entered does not exist.
7
130
7
The specified PrimeDN does not exist in the system.
The additional information assigned to the Feature Button is

invalid.
- 120 The line number entered does not exist.
The allowable number of GCO, POOL or PhDn has been

exceeded.
The number of Flexible buttons programmed exceeds the
-
system's capacity.
The entered DN does not exist in the system (the entered
7
value conflicts with an existing extension number or
numbering plan).
The entered DN conflicts with an existing ISDN extension(s),
7
etc.
7
The designated Prime DN does not exist in the system.
System Error Codes
Station Programming Error Codes
Error Descriptions
B-11