Ipt Program Update - Toshiba Strata CTX28 Programming Manual

IP Telephone Programming
BIPU-M and IPT Program Update

IPT Program Update

The IPT program update function consists of retrieving the updated file from an FTP server, updating and
rebooting the selected IPT.
CAUTION!
Prerequisites
1. Make sure that the networking devices between BIPU, IPT and the FTP server meet the requirements
for IP-CTX (min 100Mb/s switching hub(s)).
2. Create an account on the machine designated to be the FTP server.
3. Create a FTP virtual directory on the FTP server machine and specify the physical location of the
updated file on the FTP server machine.
4. The FTP server machine IP address should be configured such that is visible by the BIPU IP address.
Programming
1. From the Program Menu,
click IP-Telephone > IPT
Program Update. The IPT
Program Update screen
displays (shown right)
2. Select BIPU card slot.
3. Select IPTs to be updated.
4. Repeat step 2 and 3 for
multiple BIPU/IPT updates.
5. Enter the FTP information.
6. Click Start to begin the IPT
Program update.
Notes
•
All selected IPTs are
updated sequentially.
•
Maximum of 128 IPTs can
be selected in one IPT
update process.
F
IELD
User Name
Password
IP Address
Data Directory
File Name
8-12
Do not run other updates simultaneously.
D
ESCRIPTION
Enter the user name of the account created on the FTP server.
Enter the password for the account created on the FTP server.
Enter the IP address of the FTP server machine.
Enter the name of the FTP virtual directory on the FTP server.
Enter the name of the updated file ("apph248.out").
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04