Toshiba Strata CTX28 Programming Manual page 370

Telephone Button Programming
200 Series Programs
Table 13-24
Data for Single Touch Button
Mic
Spkr
Spdial
Redial
Cnf/Trn
Vol Up
Vol Down
DKT's FB
ADM's FB
DSS's FB
Note & means ESC code
Example for Setting the data of Single Touch Button from Programming DKT
1. Choose Program 207 and press
2. Choose Primary DN number and press
A7
3. Press
A7!
4. Press
Table 13-25 Programs 208~218
Button Sequence
208 Station Timer
Assignments
' C‚yq
,
208-00 Primary DN
C‚yq
n,
208-01 ABR Retry Count
A7 C‚yq
, n,
208-02 ABR Retry Interval
Timer
A7 C‚yq
, n,
208-03 ABR Recall Timer
A7" C‚yq
, n,
208-04 Hold Recall Timer
A7# C‚yq
, n,
208-05 First Interdigit Timer
A7$ C‚yq
, n,
208-06 Second Interdigit
Timer
A7% C‚yq
, n,
208-07 Ring Xfer No Answer
Timer
A7& C‚yq
, n,
13-46
One Touch Data Entry Sequences (continued)
and input digits for FB and press
W‚yÃVƒ A7
and Press [ ][
Value(s)
n = 1~640
n = 5~20
(default = 15)
n = Up to 5 digits
(default = 60)
n = Up to 9 digits
(default = 20)
n = Up to 5 digits
(default = 60)
n = 0~32
(default = 15)
n = 0~180
(default = 5)
n = 0~600
(default = 32)
C‚yq
,
Setting code from DKT
[Vol Up] + [Mic]
[Vol Up] + [Spkr]
[Vol Up] + [Spdial]
[Vol Up] + [Redial]
[Vol Up] + [Cnf/Trn]
[Vol Up] + [Vol Up]
[Vol Up] + [Vol Down]
[Vol Up] + [FB on DKT]
[Vol Up] + [FB on ADM]
[Vol Up] + [FB on DSS]
‚yq
key.
‚yq
Key.
‚yq
key. In this case 12.
#!$'$ !"#
] .
Assigns timing parameters to Primary DNS.
Enter the Primary DN.
Up to 5 digits (default = no value)
Enter the number of retry attempts made by ABR when dialing a busy
telephone number.
Select the amount of time (in seconds) ABR waits between dialing
attempts.
Select the number of seconds ABR will call back the station after
receiving ring back tone from the dialed number.
Select the number of seconds before a call is placed on hold recalls.
Select the amount of time a Station has to dial after going off hook
before a call is terminated (ROT is heard).
Select the amount of time the system waits between dialed digits
before terminating a call (ROT is heard).
Select the Ring Transfer Idle station or Busy station (Camp-on) Recall
Time (in seconds).
Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Display Data
&MIC
&SPK
&SPD
&RDL
&CNF
&UP
&DWN
&FByy (yy=01-24)
&ADxyy (x=1,2 yy=01-20)
&DSxyy (x=1-8 yy=01-60)
Summary