Toshiba Strata CTX28 Programming Manual page 302

Operation
911 Remote Program Update
Important!
If power is turned off/on or if the Strata CTX is re-started before switching the Active software from
"Trial" to "Normal", the CTX670 will switch the old software back to Active.
It is your responsibility to verify the system is working correctly after Remote Update is complete.
Notes
If the new version of software is not performing properly, on the CTX670 only, you can activate
the old version of software again by initiating a Clear-reboot.
Clear-reboot swaps the active and standby sides of flash memory. You must always install a
SmartMedia card containing a copy of the current back up data before initiating a Clear-reboot or
all programmed data will be erased.
If the CTX100 system is not working properly with the new software, you must reinstall the
original software using this Update procedure.
Table 10-1 Program Update Screen Field Descriptions
F
IELD
Upload from Folder
Version Number
Number of Files
Files Uploaded
Operation
Completion
Copied blocks
Total Blocks
Active Side ID
Active Side Status
Standby Side Status
10-12
D
ESCRIPTION
Select the Strata CTX type.
Possible values: CTX100_R_MXnnn, CTX670_R_MXnnn.
Software version number displays. Example: A102MXnnn00. See
Identification.
Displays number of files that have to be uploaded. This file is static.
Displays number of files uploaded. This is a dynamic field and will change during
the process.
View operation status.
View number of blocks copied.
Possible values: 0~65536 (default = 0)
View total blocks to be updated.
Possible values: 0~65536 (default = 0)
Active Side Number.
Possible values: 0 or 1 (default = 0)
Software status display.
Possible values: Normal (default), Trial, Fault, Don't care or Error
Standby Backup Type. This field will display only when connected to a CTX670. It
will not display when connected to CTX100.
Possible values: Normal (default), Trial, Fault, Don't Care or Error
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
CTX Software