Toshiba Strata CTX28 Programming Manual page 132

Station
Assignment
5. Click on the FB to program (the button turns from yellow to red).
6. Click the desired option from the blue parameter buttons on the right.
• Directory No – Assign a Primary DN key, Secondary/Phantom DN, Phantom DN Message Waiting,
or DSS key to this FB. See
• CO Line – Assign FB as a CO, GCO or a Pooled Line. See
page 5-21
• Features – Assign ABR, ACB, DND, Short Flash, Long Flash, Privacy, Privacy Release, BGM Key,
Program Access, Account Code, Application Starting or Split Key feature to this FB.
• Call Control – Activate Speed Dial, Release Button, Release/Answer, Cancel, Source Party,
Destination Party, CLID or Night Transfer from this FB.
• Call Forward – Set Call Forwarding assignments for this FB. Forward All Calls, Forward Busy,
Forward No Answer, Forward Busy No Answer, Forward Ext/All Call, Forward Ext/Busy, Forward
Ext/No Answer and Forward Ext/Busy No Answer are available selections.
• Park Page – Assign Call Park Orbit, All Paging, Group Paging, All Emergency Paging, Individual
Emergency Paging and Paging Answer Feature access to this FB.
• Call Pickup – Assign FB to a Pickup-Group, Pickup-Directed Terminal, Pickup-Directed Group,
Pickup-Directed DN, Pickup-Any External, Pickup-CO Retrieve, Pickup-Local Retrieve, Pickup-
Remote, Pickup-Directed DN Retrieve and Pickup-On Hold and Incoming.
• Door Lock – Enable FB to unlock Door Lock. See
more details.
• Voice Mail – Enable FB to Record or Pause/Resume Voice Mail.
• Attendant – Assign Out Dial, Attendant Answer, Overflow, Position Busy, Trunk Test, Attendant
Loop or Supervised Loop Key Attendant features to this FB.
• One Touch – Assign FB as a One Touch button. See
This feature is available only with CTX software release 1.03 or higher and CTX WinAdmin
software 1.17 and higher.
• Split – Assign FB to Split the connected party and the conference master from the conference (for
private call). (Join button is used to reconnect both parties to the conference.) This feature will be
available only with CTX software release 2.2 or higher and CTX WinAdmin software 2.2 and
higher. The Split button should not be assigned to a DKT2304-CT cordless telephone.
• Blank – Clear FB assignment.
7. Click on one feature in the sub-parameter dialog box. If no other settings are required, the FB displays
an abbreviation for the selected feature.
...or if you select Directory No, CO Lines or Door Lock parameters, additional fields are required. See
the tables that follow for more details. Follow the directions in each pop-up dialog box.
8. To modify an existing feature button, double-click the feature button and make the change in the
appropriate dialog box that displays.
9. Click Submit.
5-18
"Directory Number Sub-parameters"
for more details.
"CO Lines Sub-parameters"
"Door Lock Sub-parameters"
"Setting the One Touch Button"
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
on page 5-20 for more details.
on
on page 5-21
on page
for
5-19.