Table of Contents
Advertisement
4 Paper and Other Media
Loading Tab Paper in the Tray 5 (Bypass)
Following describes the procedure for loading tab paper in the Tray 5.
Important • Tab paper cannot be loaded on the Trays 1, 2, 6 (HDF (A4 2 tray)), and 7 (HDF (A4 2 tray)).
Note
1
Open the Tray 5 (bypass).
Note
2
Hold the center of the paper guides and slide
them to the desired paper size.
4
3
Load the paper all the way into the tray from
the bottom edge first, with the side to be
copied or printed facing up and with the tab
portion to the left.
Important • Do not load paper exceeding the
Loading Paper in the Tray 6 (HCF (A3 1 Tray))
Following describes the procedure for loading paper in the Tray 6 (HCF (A3 1 Tray))
(optional).
Note
For information about changing the paper size and orientation, refer to "Changing the Paper Size for the
Tray 6 (HCF (A3 1 Tray))" (P.63).
1
Pull out the Tray 6 towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
56
• Tab paper can be used only for [Tab Margined Shift], Covers, and Separators.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
• If necessary, extend the extension flap.
The extension flap can be extended in
two stages. When pulling out the
extension flap, do it gently.
maximum fill line. It may cause paper
jams or machine malfunctions.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
CAUTION
Advertisement
Table of Contents
