Table of Contents
Advertisement
1
Pull out the tray towards you until it stops.
CAUTION
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine processes a job, do
2
Load and align the edge of the paper against
the left edge of the tray with the side to be
copied or printed on facing down.
Important • Do not load paper exceeding the
3
Push the tray in gently until it comes to a
stop.
Loading Paper in the Trays 3 to 4
Following describes the procedure for loading paper in the Trays 3 to 4.
Note
For information on changing the paper size and orientation, refer to "Changing the Paper Size for the
Trays 3 to 4" (P.62).
1
Pull out the tray towards you until it stops.
CAUTION
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine processes a job, do
2
Load and align the edge of the paper against
the left edge of the tray with the side to be
copied or printed on facing down.
Important • Do not load paper exceeding the
not pull the tray out that the job uses.
maximum fill line. It might cause paper
jams or machine malfunctions.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
not pull the tray out that the job uses.
• Do not add a new stack of paper on top of the remaining paper in the tray, in order to prevent
paper jams or any other troubles. First, remove the remaining paper in the tray, then load the
new stack of paper.
maximum fill line. It might cause paper
jams or machine malfunctions.
• Do not place any paper or things in the
empty space on the right side of the Tray
3 or 4. It may cause paper jams or
machine malfunctions.
Loading Paper
M A X
4
M A X
53
Advertisement
Table of Contents
