Table of Contents
Advertisement
Interrupting the Copy Job
You can temporarily stop the copy job to have the machine process another job.
1
Press the <Interrupt> button.
Note
2
Load a document and set features if necessary.
3
Set the number of copy sets with the numeric keypad.
4
Press the <Start> button.
5
After you have finished making the interrupt copy, press the <Interrupt> button.
Note
6
Press the <Start> button. The suspended copy job is resumed.
• The interrupt indicator lights up to indicate
that the machine is in the interrupt mode.
• The interrupt indicator goes out to indicate that the interrupt mode is exited.
• If you used the document glass to copy the document, remove the document from the
document glass.
Copying
<Interrupt> button
33
3
Advertisement
Table of Contents
