Table of Contents
Advertisement
5 Maintenance
Replacing the Booklet Staple Cartridge
When the machine is equipped with a Finisher and the booklet staple cartridge needs
to be replaced, a message appears on the touch screen. When this message appears,
replace the booklet staple cartridge.
Important • The use of staple cartridges not recommended by Fuji Xerox may impair quality and
Note
1
Make sure that the machine is not in
operation, and open the right cover of the
Finisher.
2
While pushing the lever to the right, pull the
staple cartridge unit out of the machine.
5
3
Hold the staple cartridge by the tabs on both
sides and lift the cartridge out of the unit.
4
While holding the tabs of the new staple
cartridge, push the cartridge into the unit.
72
performance. Use only staple cartridges recommended by Fuji Xerox for the machine.
• To order a staple cartridge, contact our Customer Support Center.
R3
R2
Advertisement
Table of Contents
