5 Maintenance
4
Put the used staple waste container into a
supplied plastic bag.
Important • Do not disassemble the container and
5
Hold the new staple waste container by "R5"
and push it into the machine.
Important • To prevent injury, do not put your fingers
6
Push "R5" until the lock lever moves to the
position.
5
7
Close the right cover of the finisher.
Note
Emptying the Punch Waste Container
When the punch waste container becomes full, a message appears on the touch
screen. Discard the scraps according to the message.
If you take the punch waste container out of the machine, make sure to empty it
completely. If it is reinstalled with some scraps remaining, it may become full before the
message appears again, and this can cause machine breakdown.
Important • When emptying the punch waste container, make sure that the machine is switched on. If
1
Make sure that the machine has stopped,
and open the right cover of the finisher.
74
return it to our Customer Support Center.
on top of the container.
• A message will be displayed and the machine will not operate if the right cover of the finisher
is even slightly open.
not switched on, the machine will not recognize that the punch waste container has been
emptied.