Table of Contents
Advertisement
No.
Component
6
<Interrupt> button/indicator Press this button to suspend a copy or print job in progress to have the
7
<Stop> button
8
<Start> button
9
Numeric keypad
10
<C (Clear)> button
11
<Log In/Out> button
12
<Machine Status> button
13
<Review> button
14
<Job Status> button
15
Brightness dial
16
<Job in Memory> indicator
17
<Online> indicator
machine process another job. During the Interrupt mode, the <Interrupt>
button lights up. Pressing the <Interrupt> button again exits the Interrupt
mode and resumes the suspended job.
In this manual, this button is indicated as the <Interrupt> button.
Press this button to stop the current copy job or communications.
Press this button to start copying or scanning.
Use the numeric buttons on the keypad to enter the number of copies,
passwords and other numerical values.
In this manual, these buttons are indicated as the "numeric keypad".
Press this button if you have entered a wrong numerical value with the
numeric keypad.
In this manual, this button is indicated as the <C> button.
Press this button to display the system administrator ID or user ID entry
screen when you want to log into System Administration mode or
configure authentication and account administration settings. When
logged in, press this button to log out of the authenticated state.
Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
Press this button to open the [Review] screen. In this screen, you can
check a list of the status of copy and scan features whose settings have
changed from the defaults.
Press this button to check or cancel the current job, to check or print
saved documents, or to check completed jobs.
Adjusts the brightness of the touch screen. Use this dial to enhance or
decrease the contrast.
Lights when data is stored in the machine's memory.
Lights when the machine is sending or receiving data to or from a client.
Function
Control Panel
2
21
Advertisement
Table of Contents
