Table of Contents
Advertisement
No.
Component
35
Staple cartridge
36
Hole punch waste container
37
Tri-Fold output tray
38
Tri-Fold output tray button
39
Left cover
*1 Only available when the Booklet Finisher D3 is installed.
*2 Only available when the Folding Unit (Z and C) is installed.
Note
• The Finisher and Booklet Finisher D3 are optional. In this manual, the Finisher and Booklet
A3 Plus High Capacity Tray
1
No.
Component
1
Circuit breaker
2
Tray 5 (bypass)
3
Tray 5 (bypass) top cover
4
High Capacity Tray unit
Contains staple nails. Remove this when it needs to be replaced or
when clearing staple jams.
Collects scraps from the puncher. Remove this when discarding
scraps.
*2
Delivers tri-folded (C fold and Z fold) copies.
*2
Press this button to open the Tri-Fold output tray.
Open this cover to access the inside of the machine to clear paper
jams.
Finisher D3 are both referred to as the "Finisher".
3
2
Automatically shuts off electricity in the event of current leakage.
Use this when copying or printing on paper that cannot be loaded in
Trays 1 - 4, such as heavyweight paper or other special media.
Open this cover to clear paper jams.
Delivers paper fed through the High Capacity Tray or Tray 5 (bypass)
to the main unit. Open this unit when clearing paper jams.
Function
4
5
Function
Machine Components
15
2
Advertisement
Table of Contents
