Table of Contents
Advertisement
6 Problem Solving
3
Return the lever 4b to the original position.
4
Close the finisher right cover.
Note
Paper jams Inside the D3 Folder Unit
This section explains how to remove jammed paper from inside the optional D3 Folder
Unit when it is installed in the finisher.
Note
Paper Jams at the Lever 2a and the Knob 3a
6
1
Make sure that the machine has stopped
before opening the right cover of the finisher.
2
Move the lever 2a and turn the knob 3a to
the left. Remove the jammed paper.
Note
3
Return the lever 2a to the original position.
4
Close the finisher right cover.
Note
102
• A message will be displayed and the
machine will not operate if the front cover
of the finisher is even slightly open.
Paper Jams at the Lever 2a and the Knob 3a ............................................................................102
Paper Jams at the Lever 2b and the Knob 2c ............................................................................103
Paper Jams at the Knob 2c, the Levers 2e/2f and the Tri-fold Output Tray 2d ........................103
Paper Jams at the Tri-fold Tray 2d and the Lever 2g................................................................104
Paper Jams at the Unit 4 and Knob 4a ......................................................................................105
• The jam clearance procedure differs for each jam location. Follow the instructions control
panel and remove the jammed paper.
• If paper is torn, check for any torn pieces
of paper inside the machine.
• A message will be displayed and the
machine will not operate if the front cover
of the finisher is even slightly open.
Advertisement
Table of Contents
