Table of Contents
Advertisement
4 Paper and Other Media
Changing the Paper Size
The following describes how to change the paper size for the Trays.
Note
Changing the Paper Size for the Trays 3 to 4
Following describes how to change the paper size for the Trays 3 to 4.
1
Pull out the Tray 3 towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
4
much force, the tray can hit and
injure your knees.
Important • While the machine processes a job, do
2
Remove any paper loaded on the tray.
3
While pinching the two guide levers, move
them to the size of the new paper.
4
When the paper guides are positioned
correcyly, release them.
5
Align the paper stack and load it into the tray.
Important • Do not load paper exceeding the
6
Push the tray in gently until it comes to a
stop.
Note
62
• If you need to change the paper size for trays 1 and 2, contact our Customer Support
Center.
• The paper types for the Trays are preset. Normally, plain paper is set. When replacing the
loaded paper with other types of paper, change the paper type settings to match the type of
paper to be loaded to maintain print quality.
• When setting a non-standard paper size, you must register the paper size.
CAUTION
not pull the tray out that the job uses.
maximum fill line. It might cause paper
jams or machine malfunctions.
• Do not place any paper or things in the
empty space on the right side of the Tray
3 or 4. It may cause paper jams or
machine malfunctions.
• Affix the paper size label to the front of the paper tray.
M A X
Advertisement
Table of Contents
