Table of Contents
Advertisement
2
If you enter an incorrect value, press the
<C> button and then enter the correct value.
Step 4 Starting the Copy Job
1
Press the <Start> button.
Important • If the document has been set in the
Note
If you have more documents
If you have more documents to copy, select [Next Original] on the touch screen while
the current document is being scanned. This allows you to scan the documents as a
single set of data.
2
Select [Next Original] while scanning is in
progress.
Note
3
Load the next document.
4
Press the <Start> button.
If you have more documents, repeat Steps 3 and 4.
document feeder, do not hold down the
document while it is being conveyed.
• Copies cannot be made if a copy
protection code is detected.
• If a problem occurs, an error message
appears in the touch screen. Solve the
problem in accordance with the message.
• You can set the next job during copying.
• When using the document feeder, load
the next document after the machine has
finished scanning the first document.
• When the above screen is displayed and
no operation is performed during a certain
period of time, the machine automatically
assumes that there are no more
documents.
Copying
<C> button
<Start> button
29
3
Advertisement
Table of Contents
