Step 2 Selecting Features - Fuji Xerox 4127 Quick Reference Manual

4127; 4112 mfp
Hide thumbs Also See for 4127:
Table of Contents

Advertisement

3 Basic Operations
3
Place the documents face up (when the
documents are 2-sided, place the front side
up) in the center of the document feeder.
Note
Document Glass
The document glass supports a single sheet, a book, or other similar documents up to
297 x 432 mm (A3, 11 x 17 inches).
Important • After using the document glass, close the document cover.
The document glass automatically detects standard size documents. For non-standard
size documents, input the size in the [Original Size] screen.
3
Do not apply excessive force to hold thick document on the platen glass. It may break
the glass and cause injuries.
1
Open the document cover.
Important • Ensure that a screen is displayed on the
2
Place the document face down, and align it
against the top left corner of the document
glass.
3
Close the document cover.
Note

Step 2 Selecting Features

You can select features on the [E-mail]/[Scan to Mailbox]/[Network Scanning]/[Scan to
PC] screen.
On the [All Services] screen, you can select from 4 scan modes: E-mail, Scan to
Mailbox, Network Scanning, and Scan to PC.
E-mail
Scans a document and sends the scanned data as an e-mail attachment.
Scan to Mailbox
Scans a document and saves the scanned data into a mailbox on the machine.
36
• The indicator lights up when the
document is loaded correctly.
CAUTION
control panel, and then load a document.
If a document is loaded before a screen is
displayed, the machine may not properly
detect the document size.
• When a standard size document is placed
on the document glass, the size of the
document is displayed in the message
area.

Advertisement

Table of Contents
loading

This manual is also suitable for:

4112

Table of Contents