Table of Contents
Advertisement
6 Problem Solving
3
If you cannot remove the paper in Step 2,
return the lever 2e to the original position.
Swing the lever 2e, turn the knob 2c to the
right, then remove the jammed paper.
Note
4
Swing back the opened lever (2f or 2e), and
push back the tri-fold output tray 2d.
5
Close the finisher right cover.
Note
Paper Jams at the Tri-fold Tray 2d and the Lever 2g
1
Make sure that the machine has stopped
before opening the right cover of the finisher.
6
2
Pull out the tri-fold output tray 2d, swing the
lever 2g, and remove the jammed paper.
Note
3
Return the lever 2g to the original position
and push back the tri-fold output tray 2d.
4
Close the finisher right cover.
Note
104
• If paper is torn, check for any torn pieces
of paper inside the machine.
• A message will be displayed and the
machine will not operate if the front cover
of the finisher is even slightly open.
• If paper is torn, check for any torn pieces
of paper inside the machine.
• A message will be displayed and the
machine will not operate if the front cover
of the finisher is even slightly open.
Advertisement
Table of Contents
