Table of Contents
Advertisement
Scanning
This section describes the basic scanning procedure. The following shows the
reference section for each step.
Step 1 Loading Documents ........................................................................................................ 35
Step 2 Selecting Features ........................................................................................................... 36
Step 3 Starting the Scan Job....................................................................................................... 38
Step 4 Confirming the Scan Job in Job Status ........................................................................... 39
Step 5 Saving the Scanned Data................................................................................................. 40
Step 1 Loading Documents
There are two methods for loading documents:
Document Feeder
Single sheet
Multiple sheets
Document Glass
Single sheet
Bound documents, such as books
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from
140 x 210 mm (A5, 5.5 x 8.5 inches) to 297 x 432 mm (A3, 11 x 17 inches).
The document feeder automatically detects standard size documents. For non-
standard size documents, input the size in the [Original Size] screen.
The document feeder accepts the following number of sheets.
Document Type (Weight)
Lightweight paper (38 - 49 g/m
Plain paper (50 - 80 g/m
Heavyweight paper (81 - 128 g/m
Heavyweight paper (129 - 200 g/m
Important • To avoid paper jams, use the document glass for folded or creased documents.
1
Remove any paper clips and staples before
loading the document.
2
Adjust the movable document guides to
match the size of the document loaded.
2
)
2
)
2
)
2
• Two sided scanning of lightweight paper 38 - 49 g/m
Number of
Sheets
250 sheets
250 sheets
150 sheets
)
100 sheets
2
is not supported.
Scanning
3
35
Advertisement
Table of Contents
