Table of Contents
Advertisement
2 Product Overview
FiniFinisher D3/Booklet Finisher D3
2
No.
Component
26
Interposer (Cover/
Transparency separator
tray)
27
De-curl button
28
Output tray
29
Finisher tray
30
Booklet output tray
31
Booklet output tray button
32
Right cover
33
Staple cartridges for
*1
booklet
34
Staple waste container
14
39
38
37
36 35
Load paper or transparencies for covers or separators. The machine
does not copy on paper or transparencies loaded in this tray.
Fixes the curl of output copies.
Delivers regular copies. Use the finisher tray when outputting a large
amount of copies or prints. For a regular amount of copies or prints,
select either the output tray or finisher tray.
Use this tray when outputting a large amount of copies or prints or
when stapling the output.
*1
Delivers bi-folded or bi-folded and stapled copies.
*1
Press this button to move booklets that have been delivered to a
position where they can be removed.
Open this cover to clear paper jams; replace staples or clear jammed
staples; or remove scraps from the hole punch waste container.
Contains two staple cartridges for the Booklet Creation feature.
Remove these cartridges to replace staples and clear staple jams.
Collects scraps from the stapler. Remove this cartridge to replace the
staple waste container.
26
27
34
33
32
Function
28
29
30
31
Advertisement
Table of Contents
