Table of Contents
Advertisement
4 Paper and Other Media
2
Remove any paper loaded in the tray.
3
With the side to be copied or printed on
facing up, load approximately 50 to 100
sheets of paper in the tray and align the
edges of the paper in the arrow direction (1).
Hold the long-side paper guide and slide it to
the desired paper size (2).
Important • Do not load paper exceeding the
4
With the side to be copied or printed on
facing up, load the remaining paper and
align the edges of the paper in the arrow
direction (1). Hold the short-side paper guide
on the left side and slide it to the desired
paper size (2).
Important • If the number of sheets is 100 or less, the
4
5
Push the tray in gently until it comes to a stop.
About Weight Switch Buttons for HCF (A3 1 Tray)
This section describes the weight switch buttons.
The HCF (A3 1 Tray) has weight switch buttons designed for helping feed paper
heavier than 2536 g/m
As 4127/4112 only support paper types weighing 52 to 253 g/m
need to change the original settings of weight switch buttons.
In case the weight switch buttons are moved for some reason, slide the button back to
their original positions according to the following procedure.
Important • To avoid causing paper jams or malfunctions, make sure the buttons are in the correct
1
Pull out the Tray 6 towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine is processing a job, do
58
maximum fill line. It might cause paper
jams or machine malfunctions.
• When you load tab paper, place the paper
with its drilled side to the right.
paper guides touch too tightly against the
paper, causing the paper to deform and
resulting in paper jams.
• Position the guides correctly to match the paper size. If the position of the guide is not
correct, the paper may not be fed properly and cause paper jams.
2
.
positions before using the HCF (A3 1 Tray).
CAUTION
not pull out the tray.
2
, you do not generally
Advertisement
Table of Contents
