Table of Contents
Advertisement
4 Paper and Other Media
1
Pull out the tray towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
Important • While the machine processes a job, do
2
Remove any paper loaded on the tray.
3
Loose the screw on the right to remove your
side and the other side guide.
4
4
Attach the guides according to the hole of
the paper size to change, and tighten the
screws.
5
Load and align the edge of the paper against
the right edge of the tray with the side to be
copied or printed facing up.
Important • Do not load paper exceeding the
6
Push the tray in gently until it comes to a
stop.
Note
64
CAUTION
not pull the tray out that the job uses.
maximum fill line.Doing so might cause
paper jams or machine trouble.
• Affix the paper size label to the front of
the paper tray.
M A X
Advertisement
Table of Contents
