Table of Contents
Advertisement
3 Basic Operations
Copying
This section describes the basic copy procedures. The following shows the reference
section for each procedure.
Step 1 Loading Documents
There are two methods for loading documents:
Document Feeder
Single sheet
3
Multiple sheets
Document Glass
Single sheet
Bound documents, such as books
Document Feeder
1
Remove any paper clips and staples before
loading the document.
2
Adjust the movable document guides to
match the size of the document loaded.
3
Place the documents face up (when the
documents are 2-sided, place the front side
up) in the center of the document feeder.
Note
The document feeder supports single and multiple sheet documents with sizes from
140 x 210 mm (A5, 5.5 x 8.5 inches) to 297 x 432 mm (A3, 11 x 17 inches).
The document feeder automatically detects standard size documents. For non-
standard size documents, input the size in the [Original Size] screen.
26
Step 1 Loading Documents .........................................................................................................26
Step 2 Selecting Features ............................................................................................................27
Step 3 Entering a Quantity ..........................................................................................................28
Step 4 Starting the Copy Job.......................................................................................................29
Step 5 Confirming the Copy Job in Job Status ...........................................................................30
• The indicator lights up when the
document is loaded correctly.
Advertisement
Table of Contents
