6 Problem Solving
Re-inserting the Staple Cartridge into the Cartridge Unit
The following describes how to re-insert the staple cartridge to the cartridge unit when
it has been inserted incorrectly or removed accidentally.
Be careful in removing jammed staples.
1
Open the staple cartridge cover as shown in
the figure, and remove the jammed staple.
2
See a lever on the rear side of the unit.
6
3
Move the lever in the direction of the arrow
shown in the figure.
Important • Be careful when removing jammed
4
Turn the unit upside holding the lever, and
then take off the staple cartridge from its unit.
122
CAUTION
staples to avoid hurting your fingers and
nails.