Table of Contents
Advertisement
3 Basic Operations
5
Select each tab, and configure features as
necessary.
Step 3 Starting the Scan Job
1
Press the <Start> button.
Important • If the document has been set in the
3
Note
If you have more documents
If you have more documents to scan, select [Next Original] on the touch screen while
the current document is being scanned. This allows you to scan the documents as a
single set of data.
Up to 999 pages can be stored.
Note
2
While documents are being scanned, select
[Next Original].
Note
38
document feeder, do not hold down the
document while it is being conveyed.
• Scanning cannot be performed if a copy
protection code is detected.
• If a problem occurs, an error message
appears in the touch screen. Solve the
problem in accordance with the message.
• The next scan job can proceed while
scanning.
• If the number of document pages exceeds the maximum, then scanning stops. Follow the
displayed message, and either abort the operation, or save the scanned data.
• When the screen shown above is
displayed and no operation is performed for a certain period of time, the machine
automatically assumes that there are no more documents.
• When using the document feeder, load the next document after the machine has finished
scanning the first document.
• You can change the scan settings of the next document by selecting the [Change Settings]
button that is displayed after selecting [Next Original].
<Start> button
Advertisement
Table of Contents
