Table of Contents
Advertisement
4
Open the lever and then remove the jammed
paper.
Note
5
Push in the Duplex Module gently until it comes to a stop.
6
Close the front cover.
Note
Paper Jams in the Tray 5 (Bypass)
The following describes how to clear paper jams in the Tray 5 (bypass).
1
When the HCF (A4 2 Tray) is not installed,
open the top cover of Tray 5 (bypass).
2
Remove the jammed paper and all paper
loaded in Tray 5 (bypass).
Important • When two or more sheets of paper are
Note
3
Close the top cover.
4
Fan the paper you removed making sure that all four corners are neatly aligned.
5
Insert the paper into the tray with the printing
side facing up until its leading edge lightly
touches against the paper feed entrance.
• If paper is torn, check for any torn pieces
of paper inside the machine.
• If the front cover is not completely closed, a message will appear and the machine will not
operate.
loaded, remove all of the sheets from the
tray.
• If paper is torn, check for any torn pieces
of paper inside the machine.
Paper Jams
6
87
Advertisement
Table of Contents
