Table of Contents
Advertisement
4 Paper and Other Media
3
Push the tray in gently until it comes to a stop.
Loading Tab Paper in the Trays 3 to 4
Following describes the procedure for loading tab paper in the Trays 3 to 4.
Important • Tab paper cannot be loaded on the Trays 1, 2, 6 (HDF (A4 2 tray)), and 7 (HDF (A4 2 tray)).
Note
1
Pull out the tray towards you until it stops.
When pulling out the paper tray,
do it slowly. If pulled out with too
much force, the tray can hit and
injure your knees.
4
Important • While the machine processes a job, do
2
Push the paper guide levers, and slide them
to their new positions to accommodate the
size of index paper.
3
Make sure that the levers are positioned
correctly, and release them.
4
Load and align the edge of the tab paper
against the right edge of the tray with the
side to be copied or printed on facing down.
Important • Do not load paper exceeding the
Note
54
• Make sure that the paper guide is adjusted to the size of the paper loaded.
• Tab paper can be used only for [Tab Margined Shift], Covers, and Separators.
• Before loading paper in a tray, fan the paper well. It prevents paper from sticking to each
other and reduces paper jams.
CAUTION
not pull the tray out that the job uses.
maximum fill line. It might cause paper
jams or machine malfunctions.
• Do not place any paper or things in the
empty space on the right side of the Tray.
It may cause paper jams or machine
malfunctions.
• When copying or printing on multiple set of tab paper of a set with which tab positions differ,
load each tab paper with the side to be copied or printed on facing down to set the first paper
coming on top.
M A X
Advertisement
Table of Contents
