Sony HDW-750 Maintenance Manual page 529

2 To adjust the desired channel only 2 2 2 2
1. Insert the alignment tape (HR5-1A: Part No. 8-960-076-01).
2. Select the channel to adjust and press the rotary encoder.
3. Result of adjustment appears for the selected channel only. (OK/
NG is not displayed in the ALL column.)
When STOP is pressed, data as of this timing is displayed.
When the adjustment ends normally : OK is displayed.
When the adjustment fails :
HDW-750/750CE V1
NG is displayed.
11-3. Contents of Menus
11-27