Sony HDW-750 Maintenance Manual page 158

4-6. MAINTENANCE Menu
BLK SHADING Display (Adjusting black shading)
? 02 O BLK SHADING
SHADING CH SEL
OUTPUT SELECT
R BLACK H SAW
R BLACK H PARA EX:
R BLACK V SAW
R BLACK V PARA EX:
BLACK SAW/PARA
MASTER BLACK
MASTER GAIN(TMP):
Item
SHADING CH SEL
OUTPUT SELECT
R/G/B BLACK H SAW
R/G/B BLACK H PARA
R/G/B BLACK V SAW
R/G/B BLACK V PARA
BLACK SAW/PARA
MASTER BLACK
MASTER GAIN (TMP)
*1 : TEST is displayed only when the unit of which the ROM version of the AT board is 1.40 and higher. You can check the AT version by
the ROM VERSION display in the DIAGNOSIS menu.
*2 : RGB can be selected only when the Camcorder is used in the service mode.
n
In the R/G/B BLACK H SAW/PARA and R/G/B BLACK V SAW/PARA, the lens extender position is
displayed in the rightmost-end of the menu items.
Blank : OFF
EX : ON
08 : 0.8
4-36
: R
: Y
EX: 0
0
EX: 0
0
: ON
: 0
0dB
Setting Function
R/G/B/TEST *1 Selects the channel of black shading correction.
Y/R/G/B/RGB *2 Selects the video signal that is output from the TEST OUT
and the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when the REAR BNC
OUT SEL of the OUTPUT SEL display of the OPERATION
menu selects the VBS position and when the TEST OUT
SELECT chooses the SD position.) The output signal returns
to the Y-signal without fail at power-on.
(_99 to 99) Adjusts the H.SAW correction.
The R, G and B displays are switched in accordance with the
channel selection implemented by the above SHADING CH
SEL.
(_99 to 99) Adjusts the H.PARA correction.
The R, G and B displays are switched in accordance with the
channel selection implemented by the above SHADING CH
SEL.
(_99 to 99) Adjusts the V.SAW correction.
The R, G and B displays are switched in accordance with the
channel selection implemented by the above SHADING CH
SEL.
(_99 to 99) Adjusts the V.PARA correction.
The R, G and B displays are switched in accordance with the
channel selection implemented by the above SHADING CH
SEL.
OFF/ON Turns ON/OFF all of the black shading menu items of R/G/B,
H/V and SAW/PARA corrections.
(_99 to 99) Adjusts the master black level. (All of the R, G and B signal
black levels are adjusted.)
_3/0/3/6/9/12/18/24/ Sets the temporary master gain.
30/36/42
HDW-750/750CE V1