Sony HDW-750 Maintenance Manual page 150

4-5. PAINT Menu
KNEE Display (Adjusting knee)
? 06 O KNEE
KNEE
KNEE POINT
KNEE SLOPE
KNEE SATURATION :
KNEE SAT LEVEL
WHITE CLIP
WHITE CLIP LEVEL: 108.0
Item
KNEE
KNEE POINT
KNEE SLOPE
KNEE SATURATION
KNEE SAT LEVEL
WHITE CLIP
WHITE CLIP LEVEL
DETAIL 1 Display (Adjusting DETAIL 1)
? 07 O DETAIL 1
DETAIL
APERTURE
DETAIL LEVEL
APERTURE LEVEL
DETAIL H/V RATIO:
CRISPENING
LEVEL DEPEND
LEVEL DEPEND LVL:
DETAIL FREQ.
Item
DETAIL
APERTURE
DETAIL LEVEL
APERTURE LEVEL
DETAIL H/V RATIO
CRISPENING
LEVEL DEPEND
LEVEL DEPEND LVL
DETAIL FREQ.
4-28
: ON
: 95.0
: 0
ON
: 0
: ON
Setting Function
OFF/ON Turns ON/OFF the knee correction function.
50 to 109 (%) Adjusts the master knee point level during the manual
knee adjustment.
(_99 to 99) Adjusts the master knee slope level during the manual
knee adjustment.
OFF/ON Turns ON/OFF the knee saturation function.
(_99 to 99) Adjusts the knee saturation level.
OFF/ON Turns ON/OFF the white clip function.
Note : The video level that is higher than 109% is not
100.0 to 109.5 (%) Set the master white clip level.
: ON
: ON
: 0
: 0
0
: 0
: ON
0
: 0
Setting Function
OFF/ON Turns ON/OFF the detail signal.
OFF/ON Turns ON/OFF the aperture correction function.
(_99 to 99) Sets the overall detail signal level.
(0 to 15) Sets the aperture correction level.
(_99 to 99) Sets the V. detail signal level only.
(_99 to 99) Sets the range of video signal amplitude to which the
detail signal is crispened.
OFF/ON Turns ON/OFF the level depend function. (This function
decreases the amount of detail signal when the video
signal amplitude is small.)
(_99 to 99) Sets the range of video signal amplitude that is suppressed
by the level depend.
(_99 to 99) Sets the frequency (thickness) of the H. detail signal.
output even if this setting is set to OFF.
HDW-750/750CE V1