Sony HDW-750 Maintenance Manual page 373

5. CUE/TC head replacement
(1) Remove the screw (PSW2 x 4) and hexagon
socket bolt (2 x 4) and remove the CUE/TC
head from shield case.
(2) Remove soldering of the four wires that are
connected to the CUE/TC head printed
wiring board and connect the wires to the
new head by soldering.
n
Do not make mistake of soldering positions
of the wires.
(3) Install the CUE/TC head in a shield case.
Pass the harness through the head assembly
and fix it with the screw (PSW2 x 4) and
hexagon socket bolt (2 x 4).
The standard tightening torque value :
_2
20 x 10 N.m (2 kgf.cm) (PSW2 x 4)
30 x 10 _2
N.m (3 kgf.cm)
(hexagon socket 2 x 4 bolt)
HDW-750/750CE V1
CUE/TC head
Shield case
Soldering
Soldering
Head assembly
Shield case
CUE/TC head
7-31. CUE/TC Head Assembly Replacement
PSW2 x 4
Hexagon socket
2 x 4 bolt
WHT
GRY
RED
BLK
PSW2 x 4
Hexagon socket
2 x 4 bolt
Harness
7-103