Sony HDW-750 Maintenance Manual page 139

SET STATUS Display (Selecting the status check display page that appears when the
STATUS ON/SEL/OFF switch is operated
O
? 14 SET STATUS
STATUS ABNORMAL :
STATUS FUNCTION :
STATUS AUDIO
STATUS GPS
Item
STATUS ABNORMAL
STATUS FUNCTION
STATUS AUDIO
STATUS GPS *2
*1 : The status display screens are shown as follows.
*2 : This item is displayed only when the HKDW-704 is connected.
ABNORMAL <!> display (Indicating the conditions to turn on the Abnormal LED <!> that
is set by the <!> LED display)
ABNORMAL<!>
!GAIN : ON
!SHUTTER : ON
WHT PRESET : ON
ATW RUN : ON
EXTENDER : ON
!FILTER : OFF
OVERRIDE : ON
FUNCTION display (Indicating the setup status of the various function that are set by the
FUNCTION display)
FUNCTION
ASSIGN SW <1>
ASSIGN SW <2>
LOOP REC : OFF :
- Actual State ---------
REAR BNC : OFF
TEST OUT : HD
HD SDI : OFF
HDW-750
Item
FORMAT
POWER OFF>ON TO 50i
ASSIGN SW <1>
ASSIGN SW <2>
LOOP REC
<Actual State>
REAR BNC
TEST OUT
HD SDI
HDW-750/750CE V1
* * * * * 1
)
ON
ON
: ON
: OFF
Setting Function
OFF/ON Turns ON/OFF the ABNORMAL <!> screen display.
OFF/ON Turns ON/OFF the FUNCTION screen display.
OFF/ON Turns ON/OFF the AUDIO STATUS screen display.
OFF/ON Turns ON/OFF the GPS INFORMATION screen display.
12dB
EVS
W:B
OFF
OFF
2
0
: EZ-FC
: F.MIC
0SEC
Setting Function
50i/59.94i Indicating the present format.
Display only Indication requesting to turn off the main power once when the
FORMAT is switched.
This indication appears only when the FORMAT is switched.
Displays the function that is assigned to the ASSIGN1 switch.
Displays the function that is assigned to the ASSIGN2 switch.
Displays the ON/OFF status of the LOOP REC function.
(only when the LOOP REC board is installed)
Displays the output status of the various BNC connectors.
FUNCTION
FORMAT : 59.94i
POWER OFF>ON TO 50i
ASSIGN <1>
ASSIGN <2>
LOOP REC : OFF :
- Actual State ---------
REAR BNC : VBS
TEST OUT : HD
HD SDI : OFF
HDW-730/750P
4-4. OPERATION Menu
: EZ-FC
: F.MIC
1SEC
4-17