Sony HDW-750 Maintenance Manual page 161

VTR MODE-1 Display (Setting-1 on VTR)
? 06 O VTR MODE-1
VIDEO OUT (F/R) :
AUDIO OUT (F/R) :
REC AUDIO OUT
CAMERA ADAPTER
AUDIO CH3/4 MODE: CH1/2
REAR XLR AUTO
Item
VIDEO OUT (F/R)
AUDIO OUT (F/R)
REC AUDIO OUT
CAMERA ADAPTER
AUDIO CH3/4 MODE
REAR XLR AUTO
HDW-750/750CE V1
EE
CUE
: EE
: ENABL
: ON
Setting
EE/PB
CUE/EE
EE/SAVE
ENABL/DSABL
CH1/2/SW
OFF/ON
Function
Selects the video output signal during FF/REW.
Selects the audio output signal during FF/REW.
Selects the audio output signal during recording.
EE : EE output
SAVE : No output (Energy-save mode)
Selects whether the AUDIO IN CH3, CH4 of the
camera adapter is enabled to use or not enabled
when camera adapter is installed.
ENABL : Camera adapter can be used.
DSABL : Camera adapter cannot be used.
Selects the input signal to be recorded on CH3/4.
CH1/2 : Same signals as CH1 and CH2.
SW : The input signals that are selected by the
AUDIO IN CH3, CH4 switches on the inside
panel.
Turns ON/OFF the function to detect automatically
whether connector is connected to the AUDIO IN
connector on the rear panel.
4-6. MAINTENANCE Menu
4-39