Sony HDW-750 Maintenance Manual page 283

7. Removing the brush assembly
(1) Among the two screws that are fixing the
brush base, remove the screw that is shown as
1 by the illustration.
(2) Loosen the screw 2 and move the brush
base in the direction of the arrow.
(3) Remove the screw 2 and remove the brush
assembly.
8. Removing the slip ring assembly
(1) Remove the two screws fixing the slip ring
assembly.
(2) While removing the connector on the UDR-
32 board, remove the slip ring assembly
together.
HDW-750/750CE V1
Brush assembly
Connector
UDR-32 board
7-2. Upper Drum Assembly Replacement
1PSW2 x 5
2PSW2 x 5
Brush base
B2 x 4
Slip ring assembly
7-13