Sony HDW-750 Maintenance Manual page 151

DETAIL 2 Display (Adjusting DETAIL 2)
? 08 O DETAIL 2
KNEE APERTURE
KNEE APT LEVEL
DETAIL WHT LIMIT:
DETAIL BLK LIMIT:
DETAIL V-BLK LMT:
Item
KNEE APERTURE
KNEE APT LEVEL
DETAIL WHT LIMIT
DETAIL BLK LIMIT
DETAIL V-BLK LMT
SD DETAIL Display (Adjusting DETAIL of DOWN CON OUT)
? 09 O SD DETAIL
SD DETAIL
SD DETAIL LEVEL :
SD CRISPENING
SD DTL WHT LIMIT:
SD DTL BLK LIMIT:
SD LEVEL DEPEND :
SD LV.DEPEND LVL:
SD DTL FREQ.
SD DTL H/V RATIO:
SD CROSS COLOR
Item
SD DETAIL
SD DETAIL LEVEL
SD CRISPENING
SD DTL WHT LIMIT
SD DTL BLK LIMIT
SD LEVEL DEPEND
SD LV.DEPEND LVL
SD DTL FREQ.
SD DTL H/V RATIO
SD CROSS COLOR
HDW-750/750CE V1
: OFF
: 0
0
0
0
Setting Function
OFF/ON Turns ON/OFF the knee aperture function. (This function
controls the amount of the detail signal that is added to
the highlight signal higher than the knee point.)
(0 to 199) Adjusts the amount of the detail signal that is added to the
highlight signal higher than the knee point.
(_99 to 99) Limits the white peak of the detail signal.
(_99 to 99) Limits the black peak of the detail signal.
(_99 to 99) Limits the black peak of the V. detail signal.
: ON
0
: 0
0
0
ON
0
: 0
0
: 0
Setting Function
OFF/ON Turns ON/OFF the detail signal.
(_99 to 99) Sets the overall detail signal level.
(0 to 15) Sets the range of video signal amplitude to which the
detail signal is crispened.
(_99 to 99) Limits the white peak of the detail signal.
(_99 to 99) Limits the black peak of the detail signal.
OFF/ON Turns ON/OFF the level depend function. (This function
decreases the amount of detail signal when the video
signal amplitude is small.)
(0 to 15) Sets the range of video signal amplitude that is suppressed
by the level depend.
(0 to 3) Sets the frequency (thickness) of the H. detail signal.
(0 to 7) Sets the V.component level only of the detail signal.
(0 to 15) Sets the cross-color suppression level.
4-5. PAINT Menu
4-29