Sony HDW-750 Maintenance Manual page 515

C02 : MOTOR SERVO & FG CHECK
Checks operation of the servo system motor automatically.
1. Select "C02 : MOTOR SERVO & FG CHECK" on the SERVO
CHECK MENU display and press the rotary encoder.
2. Check that a cassette tape is not inserted, and press the rotary
encoder. The self-diagnosis starts.
3. The self-diagnosis ends and the result of the self-diagnosis is
display.
When the self-diagnosis ends successfully :
The message "COMPLETE" appears.
When the self-diagnosis fails :
The message "INCOMPLETE" appears.
4. Press the ESCAPE switch to return to the SERVO CHECK
MENU display.
n
When the message "INCOMPLETE" appears, perform the
following.
The TALLY lamp flashes and an error code appears in the
timecode position on the display window.
(For the details of the warning system, refer to "3-1-2. Details of
Error Codes".)
C03 : SLACK CHECK
Displays the history of the 4 slack detections that have occurred in the
past.
1. Select "C03 : SLACK CHECK" on the SERVO CHECK MENU
display and press the rotary encoder.
2. The SLACK information in the past is displayed as follows.
1 : Newest information
4 : Oldest information
For details of the SLACK information, refer to "3. Error Diagnostics".
3. Press the ESCAPE switch to return to the SERVO CHECK
MENU display.
HDW-750/750CE V1
11-3. Contents of Menus
SERVO CHECK MENU
C02:MOTOR SERVO & FG
CHECK
PUSH RE TO CHECK
SERVO CHECK MENU
C02:MOTOR SERVO & FG
CHECK
NOW CHECKING......
SERVO CHECK MENU
C02:MOTOR SERVO & FG
CHECK
COMPLETE
SERVO CHECK MENU
C03:SLACK CHECK
SLACK CODE
1.0000
2.0000
3.0000
4.0000
11-13