Sony HDW-750 Maintenance Manual page 169

FORMAT Display (Switching the video format)
n
This menu is displayed only when the Camcorder is HDW-730.
O
? 17 FORMAT
CURRENT
NEXT
PLEASE POWER OFF
TO CHANGE FORMAT
Item
CURRENT
NEXT
VANC RX Display (Setting the UMID LINE)
O
? 18 VANC RX
UMID LINE1
UMID LINE2
Item
UMID LINE1
UMID LINE2
*1 : This item is displayed only when the unit of which the ROM version of the AT board is 1.60 and higher. You can check the AT
version by the ROM VERSION display in the DIAGNOSIS menu.
HDW-750/750CE V1
: 59.94
: 50i
This message is displayed only when the current format and
→
ON
the format that is set by NEXT are different.
At the same time, the tally lamp blinks.
Setting
59.94i/50i
59.94i/50i
* * * * * 1
: 0
: 0
Setting
0, 9 to 20
0, 564 to 593
Function
Displays the present format.
Sets the format when the power is turned on next
time.
Function
When a tape recorded by Camcorder is played back
by VTR, the line number in which the UMID data is
contained in the HD SDI output signal can be
selected. (1st field)
When a tape recorded by Camcorder is played back
by VTR, the line number in which the UMID data is
contained in the HD SDI output signal can be
selected. (2nd field)
4-6. MAINTENANCE Menu
4-47