Sony HDW-750 Maintenance Manual page 140

4-4. OPERATION Menu
AUDIO STATUS Display (Indicating the setup status on audio)
AUDIO STATUS
EMPHASYS:OFF NDF
CH1:FRONT CH3:WIRELES
CH2:REAR CH4:WIRELES
∞ 40 30
20
CH1:
CH2:
CH3:
CH4:
Item
EMPHASYS
CH1
CH2
CH3
CH4
CH1
CH2
CH3
CH4
GPS INFORMATION Display (indicating the information on GPS)
GPS INFORMATION
LATITUDE : N 35 40'12.36
LONGITUDE : E135 25'13.31
ALTITUDE : +0123m
CALC:01-03-31T12:45:35Z
REAL:01-03-31T12:45:36Z
TIME ZONE : 00 : +00:00
GPS DOP:02
Item
LATITUDE
LONGITUDE
ALTITUDE
CALC
REAL
TIME ZONE
*1 : When the unit completes calculating a location successfully, using the distance from three satellites, the time is displayed. Since it
cannot perform another calculation immediately after it has completed on calculation, this indication stops at that time.
When the unit can start another calculation, the indication starts advancing from that time. When a calculation is done correctly, the
CALC time is later than the REAL time by 1 second.
The CALC time is not displayed during play back.
*2 : When the unit has received data from one or more satellites, the correct current time is displayed. This time matches that of the GPS
clock. In any other case, the time of the built-in crystal clock is displayed.
During playback, the calculation time recorded on the tape is displayed instead of the current time.
4-18
STEREO
10 0
0V
Function
Displays the EMPHASIS, DF/NDF, and FRONT MIC MONO/STEREO setting.
Displays the input signals of CH1 to CH4.
Displays the input signal level of CH1 to CH4. (When the input signal overflows,
0 V is displayed.)
Function
Displays the latitude of the calculated location.
Displays the longitude of the calculated location.
Displays the altitude of the calculated location.
Displays the date when the calculation was done
Displays the current time *2 .
Displays time difference.
*1 .
HDW-750/750CE V1