6-7-5. Removing the Sub (Ext DC In)
Harness
1. Remove the two precision screws and remove
the sub (ext DC in) harness.
6-7-6. Removing the DC OUT/HD SDI
OUT Connectors
1. Remove the cap BNC and DC out cap.
Remove the three precision screws and
remove the DC OUT/HD SDI OUT connec-
tor assembly in the direction of the arrow.
2. Remove the coaxial cable, nut and washer.
Remove the sub (DC out) harness from the
OUT bracket.
3. Remove the nut and washer. Remove the
coaxial connector converter from the OUT
bracket.
4. Attach the new boards and the connectors by
reversing the steps of removal.
HDW-750/750CE V1
Sub (ext DC in) harness
Precision screw
P2.6 x 5
DC OUT/HD SDI OUT connector assembly
DC OUT cap
Precision screw
P2.6 x 5
Cap BNC
Washer
OUT bracket
Coaxial connecter
converter
Sub (DC out) harness
6-7. Connector Box Board Replacement
Nut
Coaxial cable
Nut
Washer
6-15