Sony HDW-750 Maintenance Manual page 323

Removal
1. Removing the S or T idler assembly
Remove the stop washer and remove the S or T
idler assembly.
n
Do not remove the poly-washers that are inserted
under the S or T idler assembly, from the mount
shaft.
There are cases that the poly-washers are re-
moved together with the idler assembly when the
idler assembly is removed. Do not lose the poly-
washers.
Installation
2. Cleaning and applying oil to the
mount shaft
(1) Clean the mount shaft using a cleaning cloth
moistened with cleaning fluid.
(2) Apply a 1/4 drop of oil to the mount shaft.
3. Installing the S or T idler assembly
(1) Hold the new S or T idler assembly with its
protruded side facing up, and insert it to the
mount shaft.
(2) Install the new stop washer.
Adjustment after Replacement
4. Capstan add-on recording Adjustment
(Refer to Section 10-5-3.)
HDW-750/750CE V1
7-11. S Idler Assembly Replacement and T Idler Assembly Replacement
S idler assembly
Stop washer
Poly-washer
Mount shafts
(Apply oil after cleaning)
Poly washers
(Do not remove it)
Recessed portion
Stop washer
Recessed portion
T idler assembly
Poly washer
7-53