Sony HDW-750 Maintenance Manual page 164

Hd camcorder
Hide thumbs Also See for HDW-750:
Table of Contents

Advertisement

4-6. MAINTENANCE Menu
VTR MODE-4 Display (Setting-4 on VTR)
O
? 09
VTR MODE-4
REC TALLY BLINK :
REC START/STOP
:
MODE SELECT
:
TIMER SET
:
STBY OFF TIMER
: 60MIN
STOP KEY FREEZ
:
Item
REC TALLY BLINK
REC START/STOP
MODE SELECT
TIMER SET
*1
STBY OFF TIMER
STOP KEY FREEZE
*1
*1 : This item is displayed only when the unit of which the ROM version of the AT board is 1.40 and higher. You can check the AT
version by the ROM VERSION display in the DIAGNOSIS menu.
VTR MODE-5 Display (Setting-5 on VTR)
? 10
O
VTR MODE-5
LTC UB-MARKER
:
REC START MARK
:
SHOT MARKER 1
:
SHOT MARKER 2
:
SHOT TIME DISP
: MD:HM
Item
Setting
LTC UB-MARKER
SET/ALL/OFF
REC START MARK
OFF/ON
SHOT MARKER 1
OFF/ON
SHOT MARKER 2
OFF/ON
SHOT TIME DISP
MD : HM/DM : HM/D : HMS
4-42
ON
OFF
SEL
1H
OFF
Setting
Function
OFF/ON
Turns ON/OFF the tally illumination control at the event of
BATTERY BEFORE END/TAPE BEFORE END.
OFF/ON
Turns ON/OFF the alarm sound at REC START/STOP.
SEL/OFF/CONT
Sets the TC display after the power-off as follows.
SEL :
OFF :
CONT : Displayed
1H/3H/8H
Sets the time to disappear the TC display after power-off
when the above MODE SELECT is set to SEL. (H : hours)
OFF/5MIN/10MIN/
When the SAVE/STBY switch is set in STBY, Sets the
30MIN/60MIN
time when the STBY state is automatically released.
OFF/FRAME/FIELD
Sets to freeze or not to freeze the playback picture by
pressing the STOP button during playback. Pressing the
STOP button again enters the STOP state.
SET
OFF
OFF
OFF
Function
Sets whether to write down the marker in UBIT of LTC, or not.
SET : Write the marker only of the items that are set to ON
ALL : All markers are written.
OFF : All markers are not written.
n
When ALL or OFF is selected, the setting of among the REC
START MARK or SHOT MARKER1 or SHOT MARKER2
becomes invalid.
Turns ON/OFF the function to write the REC START MARK.
Turns ON/OFF the function to write the SHOT MARKER 1.
Turns ON/OFF the function to write the SHOT MARKER 2.
Sets the format of the time to be displayed on LCD.
MD : HM : Month, day, hour, minute
DM : HM : Day, month, hour, minute
D : HMS : Day, hour, minute, second
The TC display turns off after elapse of the time
set by the TIMER SET below.
No displayed
among the REC START MARK or SHOT MARKER1or
SHOT MARKER2 respectively describes shown below.
HDW-750/750CE V1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdw-750pHdw-750ceHdw-730

Table of Contents