2. Removing the cleaning assembly
Remove the precision screw and cleaning assem-
bly.
(Refer to Section 7-6.)
3. Removing the gear block assembly
Remove the three precision screws. While
removing the gear block assembly, disconnect the
harness from the connector (CN501) on the
MDC-13 board.
HDW-750/750CE V1
7-24. Gear Block Assembly Replacement
Precision screw
Precision screw
P1.4 x 5
P1.4 x 5
Precision screw
P1.4 x 5
Connector (CN501) on
the MDC-13 board
Gear block
assembly
7-81