Sony HDW-750 Maintenance Manual page 159

LEVEL ADJ Display (Adjusting output signal level)
O
? 03 LEVEL ADJ
Y LEVEL
SYNC LEVEL
Pr LEVEL
Pb LEVEL
OUTPUT SELECT
Item
Y LEVEL
SYNC LEVEL
Pr LEVEL
Pb LEVEL
OUTPUT SELECT
*1 : RGB can be selected only when the Camcorder is used in the service mode.
SD LEVEL ADJ Display (Adjusting the down converter (SD OUT) output level)
n
This function is enabled only when the down-converter board DC-110/110A is installed.
(The Camcorders having the serial numbers other than No. 70000 and No. 80000 series, require an option-
al HKDW-702.)
O
? 04 SD LEVEL ADJ
SD VBS LEVEL
SD VBS SETUP LVL:
SD VF Y LEVEL
SD VF R-Y LEVEL :
SD VF B-Y LEVEL :
Item
SD VBS LEVEL
SD VBS SETUP LVL
(HDW-750 and
HDW-730 (59.94i))
SD VF Y LEVEL
SD VF R-Y LEVEL
SD VF B-Y LEVEL
HDW-750/750CE V1
: 0
: 0
: 0
: 0
: Y
Setting
(_99 to 99)
(_99 to 99)
(_99 to 99)
(_99 to 99)
*1
Y/R/G/B/RGB
: 0
HDW-750 and HDW-730 (59.94i)
0%
: 0
0
0
Setting
(_99 to 99)
0%/7.5%
(_99 to 99)
(_99 to 99)
(_99 to 99)
Function
Adjust the Y signal output level.
Adjust the sync signal output level.
Adjust the Pr signal output level.
Adjust the Pb signal output level.
Selects the video signal that is output from the TEST
OUT and the VBS/SDI OUT terminal.
(The Y-signal becomes the VBS signal when the
REAR BNC OUT SEL of the OUTPUT SEL display (of
the OPERATION menu) selects the VBS position and
when the TEST OUT SELECT chooses the SD
position.) The output signal returns to the Y-signal
without fail at power-on.
Function
Adjusts the VBS signal output level.
Selects the setup level.
0% : Normal
7.5% :When an additional setup is required.
Adjusts the VF Y signal output level.
Adjusts the VF R-Y signal output level.
Adjusts the VF B-Y signal output level.
4-6. MAINTENANCE Menu
4-37