Sony HDW-750 Maintenance Manual page 218

5-4. Operating the ALL File
Saving the Setup Contents to a Memory Stick
Category
USER
Data structure
USER layer
PRESET layer
SERVICE layer
1. Insert a Memory Stick.
2. Set the MENU ON/OFF switch to the ON position.
3. Let the ALL FILE display of the FILE menu appear on the screen and press the rotary encoder.
O
? 03 ALL FILE
ALL FILE LOAD
ALL FILE SAVE
F.ID :
ALL PRESET
STORE ALL PRESET:
CLEAR ALL PRESET:
3SEC CLR PRESET :
4. Select F.ID and set the file ID. (For details, refer to Section 4-9. "Saving/Loading User Menu Data to/
from Memory Stick" of the Operation Manual.)
5. Select ALL FILE SAVE and execute it by pressing the rotary encoder.
6. When the cursor is moved to the file selection display, select the destination file where the file is
going to be saved and press the rotary encoder. (When saving a new file, select NEW FILE.)
P00 ALL SAVE
MEMORY STICK ACCESS
DISPLAY MODE
001.
002.
003.
004.
005.NEW FILE
7. Confirm that the screen returns to the ALL FILE display and the message [COMPLETE!] appears
indicating that the saving is complete.
n
When the user sets the desired standard setup by adjusting the first HDW-750 (to be executed up to
STORE ALL PRESET), and the data is saved in a Memory Stick by the ALL FILE SAVE, the user
can set the second and subsequent cameras to have the same adjustment setup as the first camera
immediately by reading the ALL file data from a Memory Stick.
5-8
MAINTE
OPERATION PAINT
NANCE
Memory Stick
: EXEC
: EXEC
: EXEC
EXEC
EXEC
OFF
ESC
: ALL
00/00/00
00/00/00
00/00/00
00/00/00
MENU
FILE
CUSTOMIZE
ALL FILE SAVE
HDW-750/750CE V1